OEM/ODM Series 32000-Uno Row Tapered Rollerus Bearings Company, Factory

Genera

Series 32000-Uno Row Tapered Rollerus Bearings

Series metrica
Inch series

Design Variantes
Cavea
tolerantia
Internum alvi

Accedit norma metrica unius ordinis cerei cylindri gestationes in tabula ferente inscriptae, DHK etiam producit unum ordinem rotundum cylindrum gestus cum flangibus in annulis exterioribus (suffixis R), annulis exterioribus tantum cylindro tortis gerentibus (praepositione L), annulis interioribus cum cavea. et scutulis (praepositione R) et aliis specialibus cereis cylindro gestus secundum mos

Ob unius ordinis gestus cerei cylindri tantum unam directionem vim axialem accommodare possunt, hae gestus saepe ut paria adhibentur. Post petitionem DHK praebere potest has condiciones ad Face-ad Facie dispositionem (suffixis DF), collocatio Back-ad-Back (suffix DB) vel tandem dispositio (suffixis DT), ut in infra sketch. ostensum est.
DHK cereus cylindrus gestus pressis caveis ferreis ut vexillum aptatur. Quia caveis rotundi rotundi gestus ultra facies ferentem extare solent, peculiari cura curandum est ut dimensiones abutmentationis commendatae sequantur.

DHK unius ordinis cerei cylindri gestus eduntur ad tolerantiam normalem ordinis (PN) ut vexillum.

Hae gestus etiam arctiore tolerantia gigni possunt, quales roganti P6X.

Detail tolerantiae valores in capite de tolerantiae metricae cylindro gestus cerei recensentur, pag 14. Latitude tolerantiae parum gestuum alvi et Ts decernitur.

DHK tolerantia metrica cylindro gestus cereus (exclusis gestus acuminati cylindro)

Omnes dimensiones (mm);

tolerantia (-um);

Interiorem Ring

Classis tolerantia PN/(Northmanni)


Nominal genuit diameter		Deviatio	Variation	Variation	Anulus latitudo declinationis	Radialis runout	Anulus latitudo declinationis
<=	<=	dmp	Vdp	Vdmp	Bs	Kia	Ts	T1s	T2s
10 18		0 -12	12	9	0 -120	15	2000	1000	1000
18 30		0 -12	12	9	0 -120	18	2000	1000	1000
30 50		0 -12	12	9	0 -120	20	2000	1000	1000
50 80		0 -15	15	11	0 -150	25	2000	1000	1000
80 120		0 -20	20	15	0 -200	30	200 -200	100 -100	100 -100
120 180		0 -25	25	19	0 -250	35	350 -250	150 -150	200 -100
180 250		0 -30	30	23	0 -300	50	350 -250	150 -150	200 -100
250 315		0 -35	35	26	0 -350	60	350 -250	150 -150	200 -100
315 400		0 -40	40	30	0 -400	70	400 -400	200 -200	200 -200
400 500		0 -45	45	34	0 -450	85	400 -400
500 630		0 -50	50	38	0 -500	100	500 -500
630 800		0 -75	75	56	0 -750	120	600 -600
800 1000		0 -100	100	75	0 -1000	120	750 -750
1000 1250		0 -1250			0 -1250	120	1000 -1000
1250 1600		0 -160			0 -1600	120	1500 -1500
1600 2000		0 -200			0 -2000	120	1500 -1500

Anulus exterior

Classis tolerantia PN/(Northmanni)

Nominale exterius diameter		Deviatio	Variation	Variation	Radialis runout
<=	<=	Dmp	VDp	VDmp	Kia
18 30		0 -12	12	9	18
30 50		0 -14	14	11	20
50 80		0 -16	16	12	25
80 120		0 -18	18	14	35
120 150		0 -20	20	15	40
150 180		0 -25	25	19	45
180 250		0 -30	30	23	50
250 315		0 -35	35	26	60
315 400		0 -40	40	30	70
400 500		0 -45	45	34	80
500 630		0 -50	50	38	100
630 800		0 -70	70	55	120
800 1000		0 -100	100	75	120
1000 1250		0 -125	125	94	120
1250 1600		0 -160	160	120	120
1600 2000		0 -200			120
2000 2500		0 -250

DHK tolerantia metrica cylindro gestus cereus (exclusis gestus acuminati cylindro)

Omnes dimensiones (mm);

tolerantia (-um);

Interiorem Ring

Genus P6X tolerantia

Nominal genuit diameter		Deviatio	Variation	Variation	Anulus latitudo declinationis	Radialis runout	Anulus latitudo declinationis
<=	<=	dmp	Vdp	Vdmp	Bs	Kia	Ts	T1s	T2s
10 18		0 -12	12	9	0 -50	15	100 0	50～0	50～0
18 30		0 -12	12	9	0 -50	18	100 0	50～0	50～0
30 50		0 -12	12	9	0 -50	20	100 0	50～0	50～0
50 80		0 -15	15	11	0 -50	25	100 0	50～0	50～0
80 120		0 -20	20	15	0 -50	30	100 0	50～0	50～0
120 180		0 -25	25	19	0 -50	35	150 0	50～0	100～0
180 250		0 -30	30	23	0 -50	50	150 0	50～0	100～0
250 315		0 -35	35	26	0 -50	60	200 0	100～0	100～0
315 400		0 -40	40	30	0 -50	70	200 0	100～0	100～0
400 500
500 630
630 800
800 1000

Anulus exterior
Genus P6X tolerantia

Nominale exterius diameter		Deviatio	Variation	Variation	Anulus latitudo declinationis	Radialis runout
<=	<=	Dmp	VDp	VDmp	Cs	Kea
18 30		0 -12	12	9	0 -100	18
30 50		0 -14	14	11	0 -100	20
50 80		0 -16	16	12	0 -100	25
80 120		0 -18	18	14	0 -100	35
120 150		0 -20	20	15	0 -100	40
150 180		0 -25	25	19	0 -100	45
180 250		0 -30	30	23	0 -100	50
250 315		0 -35	35	26	0 -100	60
315 400		0 -40	40	30	0 -100	70
400 500		0 -45	45	34	0 -100	80
500 630		0 -50	50	38	0 -100	100
630 800
800 1000

Latitudo tolerantiae Cs idem est toBs anuli interioris eiusdem afferentis

DHK tolerantia metrica cylindro gestus cereus (exclusis gestus acuminati cylindro)

Omnes dimensiones (mm);

tolerantia (-um);

Interiorem Ring

P5 genus tolerantia

Nominal genuit diameter		Deviatio	Variation	Variation	Anulus latitudo declinationis	Radialis runout	Parte faciem runout
<=	<=	dmp	Vdp	Vdmp	Bs	Kia	d	Ts
10 18		0 -7	5	5	0 -200	5	7	200 -200
18 30		0 -8	6	5	0 -200	5	8	200 -200
30 50		0 -10	8	5	0 -240	6	8	200 -200
50 80		0 -12	9	6	0 -300	7	8	200 -200
80 120		0 -15	11	8	0 -400	8	9	200 -200
120 180		0 -18	14	9	0 -500	11	10	350 -250
180 250		0 -22	17	11	0 -600	13	11	350 -250
250 315		0 -25	19	13	0 -700	16	13	350 -250
315 400		0 -30	23	15	0 -800	19	15	400 -400
400 500		0 -35	26	18	0 -900	22	17	400 -400
500 630		0 -40	30	20	0 -1000	26	20	500 -500
630 800		0 -50	50	25	0 -1500	30	26	600 -600
800 1000		0 -65	60	30	0 -2000	35	32	750 -750

Anulus exterior
P5 genus tolerantia

Nominale exterius diameter		Deviatio	Variation	Variation	Radialis runout	Extra inclinationem variatio
<=	<=	Dmp	VDp	VDmp	Kea
18 30		0 -8	6	5	6	8
30 50		0 -9	7	5	7	8
50 80		0 -11	8	6	8	8
80 120		0 -13	10	7	10	9
120 150		0 -15	11	8	11	10
150 180		0 -18	14	9	13	10
180 250		0 -20	15	10	15	11
250 315		0 -25	19	13	18	13
315 400		0 -28	22	14	20	13
400 500		0 -33	25	17	23	15
500 630		0 -38	29	19	25	18
630 800		0 -45	34	23	30	20
800 1000		0 -60	45	30	35	25
1000 1250		0 -80	75	38	40	30
1250 1600		0 -100	90	45	45	35

Latitudo tolerantiae Cs idem est toBs anuli interioris eiusdem afferentis

DHK tolerantia metrica cylindro gestus cereus (exclusis gestus acuminati cylindro)
Omnes dimensiones (mm);
tolerantia (-um);

Interiorem Ring
P4 genus tolerantia

Nominal genuit diameter		Deviatio	Variation	Variation	Anulus latitudo declinationis	Radialis runout	Parte faciem runout	Parte faciem runout	Anulus latitudo declinationis
<=	<=	dmp ds	Vdp	Vdmp	Bs	kia	Sd	Sia	Ts
10 18		0 -5	4	4	0 -200	3	3	3	200 -200
18 30		0 -6	5	4	0 -200	3	4	4	200 -200
30 50		0 -7	6	5	0 -240	4	4	4	200 -200
50 80		0 -8	7	5	0 -300	4	5	4	200 -200
80 120		0 -10	8	5	0 -400	5	5	5	200 -200
120 180		0 -13	10	7	0 -500	6	6	7	350 -250
180 250		0 -15	11	8	0 -600	8	7	8	350 -250

Anulus exterior
P4 genus tolerantia

Nominale exterius diameter		Deviatio	Variation	Variation	Radialis runout	Extra inclinationem variatio	Parte faciem runout
<=	<=	Dmp Ds	VDp	VDmp	Kea	SD	Mare
18 30		0 -6	5	4	4	4	5
30 50		0 -7	5	5	5	4	5
50 80		0 -9	7	5	5	4	5
80 130		0 -10	8	5	6	5	6
130 150		0 -11	8	6	7	5	7
150 180		0 -13	10	7	8	5	8
180 250		0 -15	11	8	10	7	10
250 315		0 -18	14	9	11	8	10
315 400		0 -20	15	10	13	10	13

Latitudo tolerantiae Cs et VCs sunt in identica to△Bs et VBs anuli interioris eiusdem notae

Alvi unius ordinis gestus rotundi cylindri adaptatur unus contra alterum gerens in inscensu.

DHK rotundum cylindrum gerens paria faciei ad faciem disposita (suffixis DF) et dorsum-ad tergum (suffixis DB) productis alvi internis valoribus, prout in tabula infra recensita sunt. DHK paria ferre potest cum specialibus alvi axialibus postulantibus.

Axialis Internus Alvi De paired DHK taenia cylindro gestus, facie ad os (DF) disposita et ad tergum (DB)

Rore Dia. (mm)		Axialis internus alvi deiectio Series（μm
>	<=	329 Min max	320 Min max X	330 Min max	331，3．2，332，332 Min max	303，323 Min max	313 Min max
-- 30		-- --	80 120	-- --	100 140	130 170	60 100
30 40		-- --	100 140	-- --	120 160	140 180	70 110
40 50		-- --	120 160	180 220	140 180	160 200	80 120
50 65		-- --	140 180	200 240	160 200	180 220	100 140
65 80		-- --	160 200	250 290	180 220	200 260	110 170
80 100		270 310	190 230	350 390	210 270	240 300	110 170
100 120		270 330	220 280	340 400	220 280	280 340	130 190
120 140		310 370	240 300	340 400	240 300	330 390	160 220
140 160		370 430	270 330	340 400	270 330	370 430	180 240
160 180		370 430	310 370	-- --	310 370	390 450	-- --
180 190		370 430	340 400	-- --	340 400	440 500	-- --
190 200		390 450	340 400	-- --	340 400	440 500	-- --
200 225		440 500	390 450	-- --	390 450	490 550	-- --
225 250		440 500	440 500	-- --	440 500	540 600	-- --
250 280		540 500	490 55	-- --	490 550	-- --	-- --
280 300		640 700	540 600	-- --	540 600	-- --	-- --
300 340		640 700	590 650	-- --	590 650	-- --	-- --

Mod*el		Dimensiones								Extrema celeritas		rated onus		Calculus factor			Abutment et vitta dimensiones (mm)						Pondus [kg]
DIN720	ISO355	d	D	B	C	T	r1, r2 min	r3, r4 min	a	Adipe lubrication	Oleum lubricationis	Dynamic onus	Static onus	e	Y	Yo	Da max	db min	da min	Db min	Ca min	Cb min	Pondus [kg]
32068	--	340	520	106	90	112	5	5	--	500	720	1650	3150	0.37	1.6	0.88	362	374	452	496	--	--	78.7
32080	--	400	600	125	100	125	6	5	--	480	630	1960	4050	0.36	1.7	0.92	453	424	553	580	--	--	116
32084	--	420	620	118	100	125	6	5	--	450	600	2000	4200	0.37	1.6	0.88	473	444	572	600	--	--	121
32088	--	440	650	122	104	130	6	6	--	400	550	2230	4600	0.36	1.7	0.92	496	467	602	630	--	--	136
32004X	T3CC020	20	42	15	12	15	0.6	0.6	10	9000	13000	24	29	0.37	1.6	0.88	25	25	36	39	3	3	0.11
32005X	T4CC025	25	47	15	11.5	15	0.6	0.6	12	8000	11000	26	33.5	0.43	1.39	0.77	30	30	40	44	3	3.5	0.12
32006X	T4CC030	30	55	17	13	17	1	1	14	6700	9000	38	46.5	0.43	1.39	0.77	35	36	48	52	3	4	0.17
32007X	T4CC035	35	62	18	14	18	1	1	16	6000	8000	46.5	58.5	0.45	1.32	0.73	40	41	54	59	4	4	0.23
32008X	T3CD040	40	68	19	14.5	19	1	1	15	5300	7000	54	71	0.38	1.58	0.87	46	46	60	65	4	4.5	0.29
32009X	T3CC045	45	75	20	15.5	20	1	1	17	4800	6300	31	86.5	0.39	1.53	0.84	51	51	67	72	4	4.5	0.33
32010X	T3CC050	50	80	20	15.5	20	1	1	18	4500	6000	64	95	0.42	1.42	0.78	56	56	72	77	4	4.5	0.42
32011X	T3CC055	55	90	23	17.5	23	1.5	1.5	20	4000	5300	81.5	118	0.41	1.48	0.81	63	62	81	86	4	5.5	0.58
32012X	T4CC060	60	95	23	17.5	23	1.5	1.5	21	3800	5000	83	125	0.43	1.39	0.77	67	67	85	91	4	55	0.63
32013X	T4CC065	65	100	23	17.5	23	1.5	1.5	23	3400	4500	83	129	0.46	1.31	0.72	72	72	90	97	4	5.5	0.62
32014X	T4CC070	70	110	25	19	25	1.5	1.5	24	3200	4300	106	163	0.43	1.38	0.76	78	77	98	105	5	6	0.97
32015X	T4CC075	75	115	25	19	25	1.5	1.5	25	3000	4000	105	165	0.46	1.31	0.72	83	82	103	110	5	6	0.93
32016X	T3CC080	80	125	29	22	29	1.5	1.5	27	2600	3600	137	212	0.42	1.42	0.78	89	87	112	120	6	7	1.24
32017X	T4CC085	85	130	29	22	29	1.5	2.5	28	2400	3400	143	228	0.44	1.36	0.75	94	92	117	125	6	7	1.31
32018X	T3CC090	90	140	32	24	32	2	3	30	2200	3200	166	255	0.42	1.42	0.78	100	99	125	134	6	8	1.69
32019X	T4CC095	95	145	32	24	32	2	1.5	32	2200	3200	173	275	0.44	1.36	0.75	105	104	130	140	6	8	1.8
32020X	T4CC100	100	150	32	24	32	2	1.5	33	2000	3000	176	285	0.43	1.31	0.72	109	109	134	144	6	8	1.93
32021X	T4DC105	105	160	35	26	35	2.5	2	35	1900	2800	204	335	0.44	1.35	0.74	116	115	143	154	6	9	2.33
32022X	T4DC110	110	170	38	29	38	2.5	2	37	1800	2600	240	400	0.43	1.39	0.77	122	120	152	163	7	9	2.96
32024X	T4DC120	120	180	38	29	38	2.5	2	40	1700	2400	250	425	0.46	1.31	0.72	131	130	161	173	7	9	3.28
32026X	T4EC130	130	200	45	34	45	2.5	2	44	1600	2200	335	560	0.43	1.38	0.76	144	140	178	192	8	11	5.05
32028X	T4DC140	140	210	45	34	45	2.5	2	46	1600	2200	346	610	0.46	1.31	0.72	153	150	187	202	8	11	5.18
32030X	T4EC150	150	225	48	36	48	3	2.5	50	1500	2000	390	695	0.46	1.31	0.72	164	162	200	216	8	12	6.31
32032X	T4EC160	160	240	51	38	51	3	2.5	53	1300	1800	425	750	0.46	1.31	0.72	175	172	213	231	8	13	7.78
32034X	T4EC170	170	260	57	43	57	3	2.5	57	1200	1700	465	800	0.44	1.35	0.74	187	182	230	249	10	14	1.6
32036X	T3FD180	180	280	64	48	64	3	2.5	60	1100	1600	630	1100	0.42	1.42	0.78	199	192	247	267	10	16	14.2
32038X	T4FD190	190	290	64	48	64	3	2.5	63	1000	1500	640	1140	0.44	1.36	0.75	209	202	257	279	10	16	14.8
32040X	T4FD200	200	310	70	53	70	3	2.5	67	950	1400	765	1370	0.43	1.39	0.77	221	212	273	297	11	17	18.9
32044X	T4FD220	220	340	76	57	76	4	3	73	900	1300	900	1630	0.73	1.39	0.77	243	234	300	326	12	19	24.4
32048X	--	240	360	76	57	76	4	3	--	850	1200	920	1730	0.46	1.3	0.72	261	253	318	351	--	--	25.1
32052X	--	260	400	87	65	87	5	4	--	800	1100	1160	2160	0.43	1.4	0.76	287	276	352	389	--	--	38.5
32056X	--	280	420	87	65	87	5	4	--	750	1000	1180	2240	0.46	1.3	0.82	305	295	370	409	--	--	40.6
32060X	--	300	460	100	74	100	5	4	--	670	900	1530	2900	0.43	1.4	0.76	329	317	404	439	--	--	57.2
32064X	--	320	480	100	74	100	5	4	--	630	850	1560	3100	0.46	1.3	0.72	350	338	424	461	--	--	59.4
32072X	--	360	540	106	90	112	5	5	--	500	720	1740	3300	0.37	1.6	0.88	382	394	476	519	--	--	83.7
32076X	--	380	560	106	90	112	5	5	--	500	720	1920	3800	0.37	1.6	0.88	402	413	495	539	--	--	89.3

Ningbo DHK Precision Bearing Co., Ltd.

0+

Anni Usus Opus

0+

Mos muneris

0+

Technology patented

CERTIFICATE

DHK transiit IATF16949 systema qualitatis certificationis et ISO14001 systematis certificationis environmental administratio et DHK nationalis summus tech inceptis est.