OEM/ODM Series 30-Duplex Row Angularis Contact Ball gestus Company, Factory

Genera

Series 30-Duplex Row Angularis Contact Ball gestus

Open
Cum pulvis operimentum
Cum signare ring

Design Variantes
Cavea
tolerantia
Internum alvi

DHK duplici ordine angularis contactus pilae gestus principales tres habent designationes;

1) 32 et 33 genus duplex ordinis angularis contactus pilae gestus (adumbrat) pluma impletionem socors in una facie et angulo 35 contactu. Hae gestus ita inserendi sunt, ut magna vis impulsus ad stadium ducatur sine saturitate saturitatis.

2) 32 B et 33B genus duplex contactus pilae angularis angularis afferentis (sketch b), hoc est novissimae designationes, nulla foramina implens, contactus angulus 32 est. quae gestatio aeque bene in utramque partem vires accommodare possunt. DHK duplex ordo angularis contactus pilae gestationes designationis B scutis vel sigillis utrinque praesto sunt (adumbratae d et e). Ad rationes fabricandas, designatio aperta etiam gestus striatus in exterioribus circulis habere potest, qui vel scuta collocare solent. vel sigilla (adumbrata c).

3) 33DA typus duplex ordo angularis contactus pilae gestus, pluma duo-dimidii anuli interni et angulus contactus 45, nulla foramina implens, annuli interiores separabiles sunt (sketch f.
DHK duplex ordo angularis contactus pilae gestationes gignuntur et caveis chalybis pressis aptatis (sffixis nullis indicatis), caveis polyamidis (suffixis TV) vel caveis aeneis (suffixis M).

Benigne quaeso declarare hoc punctum tempus loci in order.

DHK duplex ordo globulus contactus angulorum angularium gestus editur ad tolerantiam normalem (PN) ut vexillum.

Valores detinentur in capite tolerantiae in pagina 8 ferrea radialis.

DHK tolerantiae in duplici ordine contactus pila angularis gestus (exclusis gestus cylindro attenuatis)

Omnes dimensiones (mm);

tolerantia (-um);

Interiorem Ring

PN/(Northmanni)

Nominal pertundere diam		Deviatio dmp	Variatio Vdp Series			Variation Vdmp	Taper bore 1:12 Deviatio / Variatio
>	<=	dmp	7．8．9	0．1	2．3/4	Vdmp	dmp	d1mp-dmp	Vdp
2.5 10		0 -8	10	8	6	6	15 0	15 0	10
10 18		0 -8	10	8	6	6	18 0	18 0	10
18 30		0 -10	13	10	8	8	21 0	21 0	13
30 50		0 -12	15	12	9	9	25 0	25 0	15
50 80		0 -15	19	19	11	11	30 0	30 0	19
80 120		0 -20	25	25	15	15	35 0	35 0	25
120 180		0 -25	31	31	19	19	40 0	40 0	31
180 250		0 -30	38	38	23	23	46 0	46 0	38
250 315		0 -35	44	44	26	26	52 0	52 0	44
315 400		0 -40	50	50	30	30	57 0	57 0	50
400 500		0 -45	56	56	34	34	63 0	63 0	56
500 630		0 -50	63	63	38	38	70 0	70 0
630 800		0 -75					80 0	80 0
800 1000		0 -100					90 0	90 0
1000 1250		0 -125					105 0	105 0
1250 1600		0 -160
1600 2000		0 -200

Anulus exterior

PN/(Northmanni)

Nominal Diameter exterior		Deviatio	Variatio Vdp Series			signati portantes	Variation	Radial runout
>	<=	Dmp	7．8．9	0．1	2．3/4	2 3 4	VDmp	Kea
6 18		0 -8	10	8	6	10	6	15
18 30		0 -9	12	9	7	12	7	15
30 50		0 -11	14	11	8	16	8	20
50 80		0 -13	16	13	10	20	10	25
80 120		0 -15	19	19	11	26	11	35
120 150		0 -18	23	23	14	30	14	40
150 180		0 -25	31	31	19	38	19	45
180 250		0 -30	38	38	23		23	50
250 315		0 -35	44	44	26		26	60
315 400		0 -40	50	50	30		30	70
400 500		0 -45	56	56	34		34	80
D 630		0 -50	63	63	38		38	100
630 800		0 -75	94	94	55		55	120
800 1000		0 -100	125	125	75		75	140
1000 1250		0 -125						160
1250 1600		0 -160						190
1600 2000		0 -200						220
2000 2500		0 -250						250

DHK duplex ordo globulus contactus angulorum angularis gestus ad alvi axialem globum CN (normalem) ut vexillum producitur. DHK gestus cum aliis alvi axialibus coetus in petitione praebere potest.

Nota: 33DA genus applicationis ubi onus axiale altum erit, ibi torcular aptum ad hastile vel domum obstringet quam alii gestus, ita normales alvi alvi huius designationis coetus C3 esse debet.

Valores coetus alvi in tabula infra recensentur.

Axial Internus Clearance Groups DHK Duplex Row Angularis Contact Ball Bearings

Bore Dia.		C2(um)	CN(um)	C3(um)		C4(um)
<=	<=
-- 10		1 11	5 21	12 28		25 45
10 18		1 12	6 23	13 31		27 47
18 24		2 14	7 25	16 34		28 47
24 30		2 15	8 27	18 37		30 50
30 40		2 16	9 29	21 40		33 54
40 50		2 18	11 33	23 44		36 58
50 65		3 22	13 36	26 48		40 63
65 80		3 24	15 40	30 54		46 71
80 100		3 26	18 48	35 63		55 83
100 120		4 30	22 53	42 73		65 96
120 140		4 34	25 59		48 82	74 108

Mod*el	Dimensiones					rated onus	C5(um)	Extrema celeritas		Pondus
Mod*el	d	D	B	r1,r2 Min	r3,r4 Min	Dynamic onus Cr	Static onus Cor	Adipe lubrication	Oleum lubricationis	Pondus
3005B	25	47	16	0.6	21.2	15.2	11.0	9500	12000	0.100
3005B.2RSR	25	47	16	0.6	21.2	15.2	11.0	9500	--	0.100
3005B.2Z	25	47	16	0.6	21.2	15.2	11.0	9500	--	0.100
3006B	30	55	19	1	24.8	20.3	15.5	8000	10000	0.160
3006B.2RSR	30	55	19	1	24.8	20.3	15.5	8000	--	0.160
3006B.2Z	30	55	19	1	24.8	20.3	15.5	8000	--	0.160
3007B	35	62	20	1	27.8	24.2	20.4	6500	8500	0.240
3007B.2RSR	35	62	20	1	27.8	24.2	20.4	6500	--	0.240
3007B.2Z	35	62	20	1	27.8	24.2	20.4	6500	--	0.240
3008B	40	68	21	1	30.8	24.5	20.8	6000	7800	0.279
3008B.2RSR	40	68	21	1	30.8	24.5	20.8	6000	--	0.279
3008B.2Z	40	68	21	1	30.8	24.5	20.8	6000	--	0.279
3009B	45	75	23	1	--	39.3	36.4	5600	6200	0.364
3009B.2RSR	45	75	23	1	--	39.3	36.4	5600	--	0.364
3009B.2Z	45	75	23	1	--	39.3	36.4	5600	--	0.364
3010B	50	80	23	1	--	42.3	41.9	5300	6600	0.395
3011B	55	90	26	1	--	43.7	44.7	4800	5800	0.581
3011B.2RSR	55	90	26	1	--	43.7	44.7	4800	--	0.581
3011B.2Z	55	90	26	1	--	43.7	44.7	4800	--	0.581
3012B	60	95	26	1.1	--	47.2	53.4	4400	5000	0.621
3012B.2RSR	60	95	26	1.1	--	47.2	53.4	4400	--	0.621
3012B.2Z	60	95	26	1.1	--	47.2	53.4	4400	--	0.621
3013B	65	100	26	1.1	--	49.5	59.2	4000	4800	0.661
3013B.2RSR	65	100	26	1.1	--	49.5	59.2	4000	--	0.661
3013B.2Z	65	100	26	1.1	--	49.5	59.2	4000	--	0.661
3014B	70	110	30	1.1	--	54.2	58.9	3600	4400	0.950
3014B.2RSR	70	110	30	1.1	--	54.2	58.9	3600	--	0.950
3014B.2Z	70	110	30	1.1	--	54.2	58.9	3600	--	0.950
3015B	75	115	30	1.1	--	57.7	66.5	3400	4000	1.003
3015B.2RSR	75	115	30	1.1	--	57.7	66.5	3400	--	1.003
3015B.2Z	75	115	30	1.1	--	57.7	66.5	3400	--	1.003
3016B	80	125	34	1.1	--	63.5	67.8	3100	3800	1.380
3016B.2RSR	80	125	34	1.1	--	63.5	67.8	3100	--	1.380
3016B.2Z	80	125	34	1.1	--	63.5	67.8	3100	--	1.380
3017B	85	130	34	1.1	--	68.3	77.5	2900	3600	1.447
3017B.2RSR	85	130	34	1.1	--	68.3	77.5	2900	--	1.447
3017B.2Z	85	130	34	1.1	--	68.3	77.5	2900	--	1.447
3018B	90	140	37	1.5	--	69.8	77.3	2700	3300	1.872
3018B.2RSR	90	140	37	1.5	--	69.8	77.3	2700	--	1.872
3018B.2Z	90	140	37	1.5	--	69.8	77.3	2700	--	1.872
3019B	95	145	37	1.5	--	72.4	82.9	2600	3100	1.954
3019B.2RSR	95	145	37	1.5	--	72.4	82.9	2600	--	1.954
3019B.2Z	95	145	37	1.5	--	72.4	82.9	2600	--	1.954
3020B	100	150	37	1.5	--	74.7	88.2	2500	--	2.040
3020B.2RSR	100	150	37	1.5	--	74.7	88.2	2500	2800	2.040
3020B.2Z	100	150	37	1.5	--	74.7	88.2	2500	--	2.040

Ningbo DHK Precision Bearing Co., Ltd.

0+

Anni Usus Opus

0+

Mos muneris

0+

Technology patented

CERTIFICATE

DHK transiit IATF16949 systema qualitatis certificationis et ISO14001 systematis certificationis environmental administratio et DHK nationalis summus tech inceptis est.