OEM/ODM Series 39-Duplex Row Angularis Contact Ball gestus Company, Factory

Genera

Series 39-Duplex Row Angularis Contact Ball gestus

Open
Cum pulvis operimentum
Cum signare ring

Design Variantes
Cavea
tolerantia
Internum alvi

DHK duplici ordine angularis contactus pilae gestus principales tres habent designationes;

1) 32 et 33 genus duplex ordinis angularis contactus pilae gestus (adumbrat) pluma impletionem socors in una facie et angulo 35 contactu. Hae gestus ita inserendi sunt, ut magna vis impulsus ad stadium ducatur sine saturitate saturitatis.

2) 32 B et 33B genus duplex contactus pilae angularis angularis afferentis (sketch b), hoc est novissimae designationes, nulla foramina implens, contactus angulus 32 est. quae gestatio aeque bene in utramque partem vires accommodare possunt. DHK duplex ordo angularis contactus pilae gestationes designationis B scutis vel sigillis utrinque praesto sunt (adumbratae d et e). Ad rationes fabricandas, designatio aperta etiam gestus striatus in exterioribus circulis habere potest, qui vel scuta collocare solent. vel sigilla (adumbrata c).

3) 33DA typus duplex ordo angularis contactus pilae gestus, pluma duo-dimidii anuli interni et angulus contactus 45, nulla foramina implens, annuli interiores separabiles sunt (sketch f.
DHK duplex ordo angularis contactus pilae gestationes gignuntur et caveis chalybis pressis aptatis (sffixis nullis indicatis), caveis polyamidis (suffixis TV) vel caveis aeneis (suffixis M).

Benigne quaeso declarare hoc punctum tempus loci in order.

DHK duplex ordo globulus contactus angulorum angularium gestus editur ad tolerantiam normalem (PN) ut vexillum.

Valores detinentur in capite tolerantiae in pagina 8 ferrea radialis.

DHK tolerantiae in duplici ordine contactus pila angularis gestus (exclusis gestus cylindro attenuatis)

Omnes dimensiones (mm);

tolerantia (-um);

Interiorem Ring

PN/(Northmanni)

Nominal pertundere diam		Deviatio dmp	Variatio Vdp Series			Variation Vdmp	Taper bore 1:12 Deviatio / Variatio
>	<=	dmp	7．8．9	0．1	2．3/4	Vdmp	dmp	d1mp-dmp	Vdp
2.5 10		0 -8	10	8	6	6	15 0	15 0	10
10 18		0 -8	10	8	6	6	18 0	18 0	10
18 30		0 -10	13	10	8	8	21 0	21 0	13
30 50		0 -12	15	12	9	9	25 0	25 0	15
50 80		0 -15	19	19	11	11	30 0	30 0	19
80 120		0 -20	25	25	15	15	35 0	35 0	25
120 180		0 -25	31	31	19	19	40 0	40 0	31
180 250		0 -30	38	38	23	23	46 0	46 0	38
250 315		0 -35	44	44	26	26	52 0	52 0	44
315 400		0 -40	50	50	30	30	57 0	57 0	50
400 500		0 -45	56	56	34	34	63 0	63 0	56
500 630		0 -50	63	63	38	38	70 0	70 0
630 800		0 -75					80 0	80 0
800 1000		0 -100					90 0	90 0
1000 1250		0 -125					105 0	105 0
1250 1600		0 -160
1600 2000		0 -200

Anulus exterior

PN/(Northmanni)

Nominal Diameter exterior		Deviatio	Variatio Vdp Series			signati portantes	Variation	Radial runout
>	<=	Dmp	7．8．9	0．1	2．3/4	2 3 4	VDmp	Kea
6 18		0 -8	10	8	6	10	6	15
18 30		0 -9	12	9	7	12	7	15
30 50		0 -11	14	11	8	16	8	20
50 80		0 -13	16	13	10	20	10	25
80 120		0 -15	19	19	11	26	11	35
120 150		0 -18	23	23	14	30	14	40
150 180		0 -25	31	31	19	38	19	45
180 250		0 -30	38	38	23		23	50
250 315		0 -35	44	44	26		26	60
315 400		0 -40	50	50	30		30	70
400 500		0 -45	56	56	34		34	80
D 630		0 -50	63	63	38		38	100
630 800		0 -75	94	94	55		55	120
800 1000		0 -100	125	125	75		75	140
1000 1250		0 -125						160
1250 1600		0 -160						190
1600 2000		0 -200						220
2000 2500		0 -250						250

DHK duplex ordo globulus contactus angulorum angularis gestus ad alvi axialem globum CN (normalem) ut vexillum producitur. DHK gestus cum aliis alvi axialibus coetus in petitione praebere potest.

Nota: 33DA genus applicationis ubi onus axiale altum erit, ibi torcular aptum ad hastile vel domum obstringet quam alii gestus, ita normales alvi alvi huius designationis coetus C3 esse debet.

Valores coetus alvi in tabula infra recensentur.

Axial Internus Clearance Groups DHK Duplex Row Angularis Contact Ball Bearings

Bore Dia.		C2(um)	CN(um)	C3(um)		C4(um)
<=	<=
-- 10		1 11	5 21	12 28		25 45
10 18		1 12	6 23	13 31		27 47
18 24		2 14	7 25	16 34		28 47
24 30		2 15	8 27	18 37		30 50
30 40		2 16	9 29	21 40		33 54
40 50		2 18	11 33	23 44		36 58
50 65		3 22	13 36	26 48		40 63
65 80		3 24	15 40	30 54		46 71
80 100		3 26	18 48	35 63		55 83
100 120		4 30	22 53	42 73		65 96
120 140		4 34	25 59		48 82	74 108

Mod*el	Dimensiones					rated onus	C5(um)	Extrema celeritas		Pondus
Mod*el	d	D	B	r1,r2 Min	r3,r4 Min	Dynamic onus Cr	Static onus Cor	Adipe lubrication	Oleum lubricationis	Pondus
3905B	25	42	13	0.3	--	9.6	7.5	11000	12300	0.062
3905B.2RSR	25	42	13	0.3	--	9.6	7.5	11000	--	0.062
3905B.2Z	25	42	13	0.3	--	9.6	7.5	11000	--	0.062
3906B	30	47	13	0.6	--	9.9	8.3	9500	10500	0.095
3906B.2RSR	30	47	13	0.6	--	9.9	8.3	9500	--	0.095
3906B.2Z	30	47	13	0.6	--	9.9	8.3	9500	--	0.095
3907B	35	55	15	0.6	--	12.9	11.3	8000	9500	0.138
3907B.2RSR	35	55	15	0.6	--	12.9	11.3	8000	--	0.138
3907B.2Z	35	55	15	0.6	--	12.9	11.3	8000	--	0.138
3908B	40	62	16	0.6	--	17.4	15.8	6500	8000	0.158
3908B.2RSR	40	62	16	0.6	--	17.4	15.8	6500	--	0.158
3908B.2Z	40	62	16	0.6	--	17.4	15.8	6500	--	0.158
3909B	45	68	16	0.6	--	17.9	17.2	6000	6800	0.183
3909B.2RSR	45	68	16	0.6	--	17.9	17.2	6000	--	0.183
3909B.2Z	45	68	16	0.6	--	17.9	17.2	6000	--	0.183
3910B	50	72	16	0.6	--	19.1	19.6	5800	7200	0.189
3910B.2RSR	50	72	16	0.6	--	19.1	19.6	5800	--	0.189
3910B.2Z	50	72	16	0.6	--	19.1	19.6	5800	--	0.189
3910B.2RSR	50	80	23	1	--	42.3	41.9	5300	--	0.395
3910B.2Z	50	80	23	1	--	42.3	41.9	5300	--	0.395
3911B	55	80	19	0.6	--	20.0	21.7	5300	6200	0.282
3911B.2RSR	55	80	19	0.6	--	20.0	21.7	5300	--	0.282
3911B.2Z	55	80	19	0.6	--	20.0	21.7	5300	--	0.282
3912B	60	85	19	0.6	--	21.0	23.8	4800	5300	0.303
3912B.2RSR	60	85	19	0.6	--	21.0	23.8	4800	--	0.303
3912B.2Z	60	85	19	0.6	--	21.0	23.8	4800	--	0.303
3913B	65	90	19	1	--	21.4	24.8	4500	5000	0.324
3913B.2RSR	65	90	19	1	--	21.4	24.8	4500	--	0.324
3913B.2Z	65	90	19	1	--	21.4	24.8	4500	--	0.324
3914B	70	100	23	1	--	25.8	30.0	4000	4600	0.516
3914B.2RSR	70	100	23	1	--	25.8	30.0	4000	--	0.516
3914B.2Z	70	100	23	1	--	25.8	30.0	4000	--	0.516
3915B	75	105	23	1	--	26.0	31.3	3800	4300	0.546
3915B.2RSR	75	105	23	1	--	26.0	31.3	3800	--	0.546
3915B.2Z	75	105	23	1	--	26.0	31.3	3800	--	0.546
3916B	80	110	23	1	--	26.7	32.5	3500	4000	0.576
3916B.2RSR	80	110	23	1	--	26.7	32.5	3500	--	0.576
3916.2Z	80	110	23	1	--	26.7	32.5	3500	--	0.576
3917B	85	120	26	1.1	--	31.5	38.5	3300	3700	0.821
3917B.2RSR	85	120	26	1.1	--	31.5	38.5	3300	--	0.821
3917B.2Z	85	120	26	1.1	--	31.5	38.5	3300	--	0.821
3918B	90	125	26	1.1	--	32.1	40.1	3100	3400	0.861
3918B.2RSR	90	125	26	1.1	--	32.1	40.1	3100	--	0.861
3918B.2Z	90	125	26	1.1	--	32.1	40.1	3100	--	0.861
3919B	95	130	26	1.1	--	32.6	41.7	3000	3300	0.901
3919B.2RSR	95	130	26	1.1	--	32.6	41.7	3000	--	0.901
3919B.2Z	95	130	26	1.1	--	32.6	41.7	3000	--	0.901
3920B	100	140	30	1.1	--	37.9	48.5	2800	--	1.270
3920B.2RSR	100	140	30	1.1	--	37.9	48.5	2800	3200	1.270
3920B.2Z	100	140	30	1.1	--	37.9	48.5	2800	--	1.270

Ningbo DHK Precision Bearing Co., Ltd.

0+

Anni Usus Opus

0+

Mos muneris

0+

Technology patented

CERTIFICATE

DHK transiit IATF16949 systema qualitatis certificationis et ISO14001 systematis certificationis environmental administratio et DHK nationalis summus tech inceptis est.